ASC Series

ICEpower // Products // Other // ASC Series

The one that you want

The ASC Series includes features such as universal mains, ErP compliant standby and wake-on-signal. This makes it very convenient for consumer applications and guitar/bass amplifiers. The ASC Series previously included the 300ASC, 300AC and 700ASC. These products have been renamed 300AS1, 300A1 and 700AS1. The old names may still occur in some technical documentation, certifications, order confirmations, etc.

Where is it used?

ICEpower’s products have a wide range of potential uses, making them preferred among world-leading audio brands. If you want to know more about how to best utilize the modules in the ASC Series, you can click below to see the typical applications.

Applications

Below you can see the application possibilities for the ASC Series. If you have any doubt or questions, please contact our sales team.


Hifi amplifiers


Subwoofers


Multi channel amplifiers


AV Recievers

Comparison chart

100AS1/2 300AS1 300A1 700AS1/2 1200AS1/2
Universal Mains SMPS (85 – 264 VAC, 47 Hz – 63 Hz)
ErP (1275 / 2008 / EC) compliant standby mode with less than 0.5W power consumption
+/-12 V Regulated auxillary power supply DC output
(+/-17 V)

(+/-12 V)

(+/-15 V)

(+/-15 V)
+5 V Regulated auxillary power supply DC output
(+ 7 V)
Auto-start or wake up on signal (signal sense)
DC-Bus output for powering additional amplifiers
Balanced input and output
Soft start-up and mute/de-mute
Comprehensive protection scheme (thermal, over-current, high-frequency, under-voltage)
Mechanically rugged construction (Tested for 70G shocks in six directions)
Pre-approved for Safety, EMC and RoHS compliance

Key Performance Parameters

100AS1/2 300AS1 300A1 700AS1/2 1200AS1/2
Amplifier Output Power per channel 100 W (4 Ω) 300 W (4 Ω) 300 W (4 Ω) 700 W (4 Ω) 1200 W (4 Ω)
1 % THD+N, 20 Hz – 20 kHz 50 W (8 Ω) 150 W (8 Ω) 150 W (8 Ω) 350 W (8 Ω) 600 W (8 Ω)
Amplifier Output Power per channel10 % THD+N, 20 Hz – 20 kHz 135 W (4 Ω) 380 W (4 Ω) 380 W (4 Ω) 800 W (4 Ω) 1400 W (4 Ω)
Minimum load impedance 3 Ω 2.5 Ω 2.5 Ω 2.5 Ω 2.7 Ω
Maximum amplifier efficiency 90%
Maximum total amp+psu efficiency 72% 80% 84% 80%
Supply voltage input 85-264 VAC 85-264 VAC 22-55 VDC 85-264 VAC 85-264 VAC
Peak output current 12:00 AM 20 A 20 A 30 A 38 A
Dynamic range 109 dB 113 dB 113 dB 117 dB 129 dB
Output referenced idle noise (A-weighted) 77 μV 75 μV 75 μV 70 μV 25 μV
THD+N 1 W/1 kHz 0.005 % 0.006 % 0.006 % 0.006 % 0.005 %

Learn more

ICEpower 200ASC

The 200ASC combines an efficient forward type power supply with a 1x 200W high quality class D amplifier. It includes a DC hanger bus for powering up to two 200AC hanger amplifiers. On its own it is therefore perfect for single channel applications such as subwoofers, bass and guitar amplifiers. Combined with 200AC hanger amplifiers, it can be used for 2- and 3-way PA speakers, studio monitors, hifi and home automation amplifiers.

Key performance Parameters

Key Performance Parameters

Output Power 1 % THD+N, 20 Hz – 20 kHz 230 W (4 Ω)
Minimum load impedance 2 Ω
Maximum amplifier efficiency
Maximum total amp+psu efficiency 79 %
Supply voltage input 85-264 VAC
Peak output current 12.5 A
Dynamic range 110 dB
Amplifier maximum output voltage per channel 43 V
Output referenced idle noise (A-weighted) 90 µV
THD+N 1W/1kHz 0.006 %

ICEpower 200AC

The 200AC is the amplifier section of the 200ASC. It is a great sounding 1x 200W class D amplifier which can be powered from the DC hanger bus of the 200ASC.

Key performance Parameters

Key Performance Parameters

Output Power 1 % THD+N, 20 Hz – 20 kHz 240 W (4 Ω)
Minimum load impedance 3 Ω
Maximum amplifier efficiency 89 %
Maximum total amp+psu efficiency
Supply voltage input +47 VDC
Peak output current 12.5 A
Dynamic range 110 dB
Amplifier maximum output voltage per channel 43 V
Output referenced idle noise (A-weighted) 90 µV
THD+N 1W/1kHz 0.006 %

Still haven’t found what you’re looking for?

If you are in need of or working on an audio solution, and you can’t find what you’re looking for, please don’t hesitate to contact us.

<p class="demo_store"><strong>Price Based Country</strong> test mode enabled for testing Czech Republic. You should do tests on private browsing mode. Browse in private with <a href="https://support.mozilla.org/en-US/kb/private-browsing-use-firefox-without-history">Firefox</a>, <a href="https://support.google.com/chrome/answer/95464?hl=en">Chrome</a> and <a href="https://support.apple.com/kb/ph19216?locale=en_US">Safari</a></p>